Our Roofing Services in Selma
We inspect first, then recommend the path that fits your roof: repair, replace, or maintain. Selma’s housing is about 74.6% single-family homes, 19.1% multifamily, and 6.2% mobile homes, so we treat each property on its own terms rather than applying one template. You can see the full scope of what we install and service on our main roofing page, and the services below cover what Selma homeowners ask about most. Offering a focused set of exterior services is a deliberate choice, and it is why our roofing work holds up.
Roof Inspections
A roof inspection should happen yearly and after any major storm. We check decking, flashing, valleys, underlayment, and ventilation, then explain what we found with photos and a plain recommendation. Any reputable roofing contractor should be able to document completed inspections and the permits that follow, and we do. A professional inspection is the honest starting point before any talk of repairs or a new roof.
Roof Repair and Leak Repair
We handle roof repairs of every size, from resealing flashing to replacing damaged or missing shingles so water stays out. Roof leaks rarely announce themselves until a ceiling stain or a damp attic shows up, so catching the source early keeps a small problem small. Part of the inspection is telling the difference between shingle failure, which is often a quick repair, and underlayment failure, which can call for more extensive work. Emergency repairs include temporary measures to stop further damage from active leaks until a full repair is scheduled.
Roof Replacement and New Roof Installation
A full replacement covers tear-off, decking repair, new underlayment, proper ventilation, and a new roof surface. Most roofs in this region last between 20 and 30 years, and balanced attic ventilation is what manages the heat and moisture that shorten that lifespan in the Valley. We build the whole roofing system, not just the top layer, so a full replacement holds up for the long term.
Tile Roof, Shingle, Metal, and Low-Slope Patio Roofs
We work across the materials Selma homes actually use. Asphalt shingles are the most common choice nationwide and a practical fit here. A tile roof can last over 50 years with proper maintenance, which is why tile remains popular on many homes in the area, and we repair and replace tile with the same care as any other surface. Metal reflects solar heat and improves energy efficiency, and flat or low-slope sections, common on patios and additions, are built for runoff and durability. Wood shingles can reach 30 years when maintained.
Commercial Roofing and Rooftop Systems
We also take on commercial roofing for business owners in and around Selma, including flat and single-ply systems built for heavier foot traffic and rooftop equipment. Commercial roofing comes with its own permitting and inspection steps, and we handle those alongside the install. We reroof around existing solar arrays and rooftop HVAC with sealed penetrations that keep water out. If you are planning solar, we coordinate the roof so the installation sits on a sound, long-term surface. Whether the project is residential or commercial, the same in-house crews and the same standards apply.
Why Selma Homeowners Choose Cobex Over Other Roofing Companies
Homeowners choose us because we are verifiable, we communicate, and our own people do the work. You can confirm our license, read our reviews, and reach a real project team through the job. Before you hire any of the roofing contractors in this area, ask about their license and insurance, check their local reputation and rating online, and be wary of door-to-door pressure or a contractor with no real presence in the area. We welcome every one of those questions, and we would rather answer them than dodge them like some other roofing companies do.
In California, roofers and other contractors are required to carry workers’ compensation for their employees and general liability insurance for property damage. We meet those obligations, and we keep communication clear and managed from first call to final walkthrough.
Want the proof in hand? Reach out for a free inspection and we’ll walk you through our credentials and process.
Licensed, Accredited, and Locally Accountable
We hold CSLB License #1031864, and you can verify it directly through the state board. We have been BBB accredited since 2017, and BuildZoom places us in the top 1% of California licensed contractors by their scoring. These are checkable facts, not slogans, and we encourage you to look up our rating and record before deciding. When you compare roofing companies, that kind of verifiable proof should carry weight.
In-House Crews, Not Subcontractors
Our crews are in-house, which means the roofers on your roof answer to us and to our quality standards. A dedicated Project Manager runs the job on site, and a Client Success Manager keeps you updated along the way. You always know who to call. That structure is part of why our customers describe the process as managed rather than chaotic, and it is what you should look for when you set out to find a crew you can trust.
How Your Selma Roofing Project Works
Here is what to expect: a free inspection, an itemized written scope, permitted production, and a clean final walkthrough. California law limits a contractor down payment to 10% or $1,000, whichever is less, and we work within that. Your contract spells out scope, payment terms, and warranty details so there are no surprises later. We encourage you to get written estimates and compare bids from several roofing companies, because a fair, documented quote holds up against a vague lowball one.
Step 1: Free Inspection and No-Obligation Quote
We inspect the roof, document what we find, and give you a written estimate with no obligation. You see the condition of the decking, flashing, and ventilation before any decision is made. Request this first; it costs you nothing and commits you to nothing.
Step 2: Itemized Scope, No Surprises After Tear-Off
Your scope lists every line of the work so the price is clear up front. If we uncover damaged decking after tear-off, we document it and get your approval before any added work proceeds. You stay in control of the budget.
Step 3: Permits, Production, and Final Inspection
We handle the permit and track the inspections the City assigns. Keep in mind replacements commonly finish in one to five working days depending on scope, with permit and inspection timing factored into the schedule.
Step 4: Cleanup and Walkthrough
We clean the site, run a magnet for stray nails, and walk the finished roof with you. The job is done when you are satisfied and the final inspection has passed.
Selma Roofing: Permits, Climate, and Local Housing
We handle Selma permits and inspections, and we build roofs for Selma’s heat, wind, and rain patterns. Permitting runs through the City of Selma, not the county office, and the local design requirements shape the roofing system we install, from fastening to ventilation. Knowing the local code and the local housing stock is what separates a roof that lasts from one that simply looks finished.
Permits and Inspections in Selma
Roofing permits inside city limits are issued by the City of Selma Community Development Department, Building Division at 1710 Tucker Street. The City publishes a specific Re Roof Residential Form, and we prepare and submit it for you. Inspection requests made before 3:30 p.m. may generally be scheduled for the following day. The City also requires approved documents at the jobsite and a ladder available when the inspector needs roof or attic access, and we make sure both are ready.
Older Homes and Decking: Why We Inspect First
About 64.1% of Selma’s roughly 7,225 housing units were built before 1990, and 33.8% predate 1970. Older roofs often hide worn decking, tired flashing, and poor ventilation under the top layer, which is exactly why we inspect before we recommend. The City’s code-enforcement review flagged 55 homes needing rehabilitation, most of them south of Rose Avenue and west of McCall Avenue, a reminder that condition varies block by block. We check what is underneath before anyone covers it up.
Heat, Wind, and Rain Runoff
Summer heat and UV in the Valley are hard on roofing, so material selection, underlayment, and balanced ventilation matter as much as the surface you see. The City’s plan-check information lists an 85 mph minimum basic wind speed and Wind Design Exposure C, which drives how we fasten and detail edges and flashing. The General Plan also notes localized ponding during heavy rain in the older area bounded by Valley View, Floral, Olive, and Thompson avenues, so we pay close attention to gutters, downspouts, and where runoff discharges to prevent future leaks.
Serving Selma and Nearby Communities
Our Fresno team is serving homeowners throughout Selma, from the Northside area near the northern city boundary to the Whitson Street and Mulberry/Nelson neighborhoods, along with Madera and other communities across the broader Valley. You can reach our office at 4705 N Sonora Avenue, Suite 115, Fresno, CA 93722, or call 559-930-0461. We do not keep a Selma office, and we would rather be straight about that than claim otherwise. If you are trying to find a dependable, professional contractor close to home, we are easy to reach and easy to verify.
Frequently Asked Questions
Do I need a permit to replace my roof in Selma?
Yes. Reroof permits are issued by the City of Selma Building Division at 1710 Tucker Street, and we prepare the Re Roof Residential Form and schedule the required inspections for you. The City assigns the specific inspections when the permit is issued.
How much does a new roof cost in Selma?
Cost depends on roof size, material, and the condition of the decking underneath, so we do not publish ranges that may not fit your home. We give you an itemized written quote after a free inspection. Compare it against written estimates from other roofing companies, and be cautious of a bid that comes in far below the rest.
Can you repair my leak, or does the whole roof need replacing?
An inspection tells us which. A localized shingle or flashing problem is often a repair, while widespread underlayment failure usually points toward a full replacement. We lay out repair, replacement, or maintenance options and let you decide with the facts in front of you.
How long will my Selma roof replacement take?
Many replacements finish in one to five working days once work starts, depending on size, material, and what we find during tear-off. Permit and inspection timing are built into the schedule. Because roofing crews often book two to four weeks out, it helps to start the conversation early.
Are cool-roof or Title 24 requirements something I need to worry about?
We confirm the current applicable California and City of Selma requirements for your specific roof and scope before we install. Given the Valley’s heat, reflective and energy-efficient options are often worth considering regardless, and we explain how each choice affects performance.
Do you serve my area of Selma?
Yes. Our Fresno team serves homeowners throughout Selma, including the Northside, Mulberry/Nelson, and Whitson Street neighborhoods, plus Madera and the surrounding areas. There is no Selma office; our crews come from our Fresno location.
Can you help document storm damage for my insurance claim?
Yes. We can document the damage with photos and detailed notes and communicate with your insurance company during the claim process. We cannot promise approval or coverage, since that decision rests with your insurer.
Get Your Free Selma Roof Inspection
Starting is simple. We come out, inspect the roof, and give you an honest assessment with a written, no-obligation quote. From there, the decision is yours, and there is no pressure either way. You can request your inspection in minutes.
Call our Fresno office at 559-930-0461, reach the main line at 916-745-6699, or request your inspection online. We are Cobex Construction Group, a family-owned exterior business and roofing contractor holding CSLB License #1031864, and we would be glad to look at your Selma roof.
